89CR250

Member
Sep 19, 2002
1
0
Hello everyone this is my first time posting..I just picked up a 89 cr250 for a good deal but the problem I have now is the clutch doesnt seem to work...the lever feel tight doesnt feel like its kinked up anywhere the bike wasnt riden in a while but i got it to jump and everything feels good. so the qusetion is where do i start to look for the problem...also is my front fork adjustble to make stiffer due to the fact im 240lbs thanks alot
 

Peer Lovell

Member
Nov 25, 1999
600
0
Let the bike warm up well and ride it around a bit to warm up the fluids etc. If the bike hasn't been ridden for a while the clutch plates may be sticking.
If that works, then change the trans. fluid.
If this doesn't work look for grooves worn in the clutch basket fingers or a crimped or worm clutch cable. Also, make sure the cable is well lubed with WD40.
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom