I'm rebuilding the clutch on a 99 CR125R and my Clymer Manual says to check the free length of the springs and the thickness of the fiber friction plates but it dosen't give any dimensions.
Can anyone tell me what the thickness should be for the plates and the free length of the springs? The springs are measuring 1.597"/1.602" and the plates are measuring 1.116"/1.118".
Thanks,
Dan
Can anyone tell me what the thickness should be for the plates and the free length of the springs? The springs are measuring 1.597"/1.602" and the plates are measuring 1.116"/1.118".
Thanks,
Dan
Last edited: