Cr 125 clutch wont engage

Joined
Aug 21, 2003
Messages
48
Likes
0
#1
hi guys i cleaned my bike and put it away for awhile because it was getting cold when i put it away everything was working fine when i went to take it out the other day becasue it was warming up the clutch wont engage i even let the bike warm up for 30 mins still wont engage if anyone knows what might be wrong i would really like to know.
BTW its not the cable because if i pull in the clutch lever i can see the tension in the line where it goes into the case.
 

NO HAND

Subscriber
Joined
Jun 21, 2000
Messages
1,198
Likes
0
#2
Sometimes when a bike has been stored for a long time the clutch plates stick together. Push the bike in 2nd gear and ride it for a while while holding the clutch lever in. It shouldn't take long you will hear the motor rev free and usually the clutch will work again. If all of this fails, you only have to remove the clutch to separate the plates one by one, soak them in oil and reinstall. It will work like new.