Ok I was riding today on a new trail. I had been skipping through six inch deep mud holes all day. Suddenly one of them went from what I thought was six inches to roughly four feet deep.
I pulled the plug and kicked the water out of the cylinder and drained the air box.
I'm thinking new air filter, piston and rings (it's still on the first piston so no big loss), and replace all of the fluids. Is there anything else I should do? I guess Fredette is going to do that porting this winter afterall.
I pulled the plug and kicked the water out of the cylinder and drained the air box.
I'm thinking new air filter, piston and rings (it's still on the first piston so no big loss), and replace all of the fluids. Is there anything else I should do? I guess Fredette is going to do that porting this winter afterall.