Fork Seal Job

[MotoGuy007]

I just bought my first dirt bike, it's a 2004 RMZ250. I am about to replace the fork seals and bushings but I don't have the fork seal driver tool. Does anyone have any suggestions for what I could use instead?? Any help would be much appreciated......thanks.

 

[plynn41]

I use a piece of 2" pvc pipe split longways in two. Make sure the end that is hitting the bushings and seals is square and smooth. Put the two pieces on the fork tube and tape them together so they move up and down together. It's cheap, but it works.

 

[MotoGuy007]

I'll try that. Thanks a lot. Very helpful.