will,
we produce frames for our generators here, and paint them. We will take a
frame and run it back throuh the line if it does not meet quality. If it bubbles or flakes from something on the frame, they just sand that part and run it back through. You can not do this if it had not been powder coated originaly. (so I am told) so if the Yamaha frame was powder coated, I should be able to sand (rough up) the bad parts, and hang it on the line. :confused:
Brad, getting better, happened over a month ago, doen't hurt neer as much
when I lay down at night:cool: c'ya