Front axel spacer ? removing trip meter unit.

[Pretzel]

Hello,
I`m going to remove the front wheel trip meter form the front axel and Id like to replace it with the correct size spacer.

When at the dealer I saw a 2002 Suzuki 250 that looked close.

Dose anyone know the part number that will work for a 2002 KDX 200

Cheers !
P-

 

[RTL]

I did not replace with a spacer, but instead used a Ty Davis cable plug which fills the hole perfectly. I switch between enduro and mx setup in minutes. Just my 02.

 

[CaptainObvious]

You might want to remove the bevel gear inside the hub.

 

[TransAm77]

I just put a cap on mine too. I used the protective cover off of an R/C car glow plug. Fit perfectly.

 

[kx_693]

i just filled mine with some silicone, i race it every weekend and i havent hand a problem with it yet

 

[KDX'r in IN]

I filled mine with super blue wheel bearing grease(automotive). Works pretty good. Through two years of riding and who knows how many pressure washings I have added grease one time. Plus I think I can just put the cable back in and go.

 

[gooby]

I've been meaning to check with Stroker 4 stroke speed equip ,they make a spacer to get rid of the odo drive on the klx.Since the odo is the same on the klx ,kdx....i believe ,that might work.I'll call them monday

 

[Lew]

http://www.strokerspeedequipment.com/ $19.99

Just left buykawi and all individual part numbers for the front hub and odometer assy. are the same between the 01 klx 300 and 01 kdx 220
Lew

 

[gooby]

Talked to stroker,they said yes they work on the kdx too.

 

[Braahp]

Go down to your local hardware store and get a rubber cap/plug and fill the hole for less than a dollar. The screw will hold it right in there.

 

[Pretzel]

Thanks gooby and Lew this is exactly what I was looking for !!

P-

 

[rcers]

I made a replacement spacer for my sons KDX out of aluminu.If you have access to machine shop I will send you a sketch of the part I made,works great.
rcers538@cs.com

 

[Pretzel]

Hello,
For the record I bought a fork Spacer from Strokers an it worked out just fine.

Thank guys !