Front brake dragging on caliper.

B

blackoutyz125

Member

Aug 7, 2004

45

0

• Jan 10, 2006

• #1

On my 00, my front wheel is dragging a bit. It looks like the outside edge of the rotor is dragging on the inside of the caliper, only on about 30% of a rotation of the wheel. I have already checked the rotor for side to side runout, and it looks good. How can I fix this without replacing the rotor?

 

N

nickyd

Member

Sep 22, 2004

873

0

• Jan 10, 2006

• #2

dragging on the inside pad I'm asssuming? check the pin and make sure the pads can slide freely - if not, the piston may be full of dirt and not retracting

 

B

blackoutyz125

Member

Aug 7, 2004

45

0

• Jan 10, 2006

• Thread starter
• #3

No, it is accually dragging on the caliper, not the pad. When I spin the wheel and look at it from the side, I can see the rotor is not quite round.

 

N

nickyd

Member

Sep 22, 2004

873

0

• Jan 10, 2006

• #4

do you have side to side movement - or up and down (as if the rotor was egg shaped

 

holeshot

Crazy Russian

LIFETIME SPONSOR

Jan 25, 2000

1,822

0

• Jan 10, 2006

• #5

I had this happen once on my '00 YZ426 after I'd installed the front wheel. Turns out that I had the spacers on each side of the wheel reversed (one spacer was just a little different in length than the other). This caused the rotor to scape on the caliper, but the wheel could still turn.

Swapping sides solved the problem....

 

B

blackoutyz125

Member

Aug 7, 2004

45

0

• Jan 10, 2006

• Thread starter
• #6

holeshot said:

I had this happen once on my '00 YZ426 after I'd installed the front wheel. Turns out that I had the spacers on each side of the wheel reversed (one spacer was just a little different in length than the other). This caused the rotor to scape on the caliper, but the wheel could still turn.

Swapping sides solved the problem....

Click to expand...

:bang:

I did change my front tire the other day....

now I feel like and idiot. :|

 

B

blackoutyz125

Member

Aug 7, 2004

45

0

• Jan 11, 2006

• Thread starter
• #7

Well I took the wheel off and tried switching the spacers. That didnt get me anywhere, it just made the dragging even worse. Anyone have any other ideas?