Okay, I just changed my first tire, what a pain!
As I was changing it the little spacers that go between the swingarm and the hub came off and got some dirt in there. I cleaned them out, but do I need to put new/more grease on them?
There is some, but I am not sure if I should put on some more. If so, is basic white lithium grease or moly based caliper grease okay?
The pieces that go on either side of the hub between the swingarm and the hub itself, they appear to be a spacer that does not turn with the hub. The axle goes through the middle of them...
I went ahead and slapped some moly based brake caliper grease on them and put everything back together for now. I guess if I shouldn't do that then I will need to clean everything out real well and put what I should on them?