- Aug 29, 2004
- 2,958
- 0
I am wondering two things i havent found definate answers on w/searches.
1.) is it a good idea to pry off the seal of a wheel bearing to regrease it or is it the best idea to replace. since the cr has three rear bearings i could only get two of them and if i hammer one out im thinking its best not to reuse if i tried to get all three greased
2.) is there such a thing as fork seal grease or is this regular wp grease which i take it as going under the dust wiper i guess to help keep out contaminates from the forks
thank for any help in advance
L+O
1.) is it a good idea to pry off the seal of a wheel bearing to regrease it or is it the best idea to replace. since the cr has three rear bearings i could only get two of them and if i hammer one out im thinking its best not to reuse if i tried to get all three greased
2.) is there such a thing as fork seal grease or is this regular wp grease which i take it as going under the dust wiper i guess to help keep out contaminates from the forks
thank for any help in advance
L+O