Solved the mystery of a Noisy Engine
Well finally got my parts to do a partial top end job. I've changed the rings, cleaned up the KIPS, left side valve was a little stuck. But the horrible noise I was getting I just figured out. Last time I changed oil, I put in 1 litre of Belray Hypoid gear oil 90w. To my horror, when I drained the engine I only got about 1/3 of a litre out. Where did the reast go? The oil was a mixture of the Belray Red, and also a sludge-like black. Now metal filings, no water. I then decided to open up the clutch side to have a quick look at the clutch basket. It had very little signs of wear. Theoretically, when I start up next, the engine should be decidedly quieter.
Shaun