Halfthrottle
Member
- May 31, 2007
- 4
- 0
Help!
I just changed the oil in my 2005 YZ125 and I found about 7 or 8 tiny (much smaller than a BB) ball bearings on the magnetic drain plug. There were also some metel fragments that sort of looked like some kind of case that might of held the balls in place. My question is what bearing is it? What could be that small in my bottom end? All the bearings in the tranny are needle bearings. (I think).
The local shop said it could be water pump bearing or power valve, but how could that be in my oil.
I trail ride the bike, it has less than 100 hours, and I only started riding in 03 so I'm about half a sqid.
I just changed the oil in my 2005 YZ125 and I found about 7 or 8 tiny (much smaller than a BB) ball bearings on the magnetic drain plug. There were also some metel fragments that sort of looked like some kind of case that might of held the balls in place. My question is what bearing is it? What could be that small in my bottom end? All the bearings in the tranny are needle bearings. (I think).
The local shop said it could be water pump bearing or power valve, but how could that be in my oil.
I trail ride the bike, it has less than 100 hours, and I only started riding in 03 so I'm about half a sqid.