theckeler
Member
- Feb 1, 2009
- 144
- 0
Need help with my 95 KX250 can't get a spark out of her... I pulled the plug and replaced it with a new one and get no spark. I pulled apart the wiring to the stator and CDI, checked the stator's resistance and it all was fine per the manual. The CDI... I couldn't figure out if I was getting correct results but they all gave me numbers. The coil I checked the primary winding and it fluctuated all over I double checked it with a coil I know that works (from my KDX) and that one too, fluctuated. The secondary showed up fine (did not fluctuate). Not sure if I'm connecting my meter to the right things... I'm using a Craftsman Multimeter (click for image) set to the first click to the right on auto. This is the first time I've really dealt with electrical so I'm not sure if I have it set correctly and if I'm putting it on the right terminals. Anyone give me some help on getting this figured out? Thanks!