K-NoD

Member
Aug 17, 2000
7
0
Hey Group,

I just bought an FmF Gnarly pipe for
my 220 and a Moose Pipe Guard, but I
don't know how to install the guard :o

Can anybody share some input?

I also got some Boyesen reeds, Tag handle
bars, Acerbis hand guards, and a new stock silencer.

I can't wait to ride this weekend in the PA mountains!

K-NoD

2000 KDX 220r
1987 CR 250
 

JonB

Member
Jun 1, 2000
28
0
I give up. I guess you will have to type the address in yourself. Sorry

------------------
99 YZ 400, 86 XR 250,
76 RD 400, Heavily Modified
71 Z 50
 

JonB

Member
Jun 1, 2000
28
0
Ahhhh!!! Someone who knows what their doing--

------------------
99 YZ 400, 86 XR 250,
76 RD 400, Heavily Modified
71 Z 50
 

G. Gearloose

Pigment of ur imagination
Jul 24, 2000
709
0
You may want to consider ths additional step before bending it up:
Add multible beads of black rtv along the inside of the pipe guard, and a few dabs on each half-round, allow to dry thoroughly before bending up and test fitting. Then add more where your bound to have some metal-metal contact after bending.

This elimiates most rattling and metal-metal wear, finish damage and related corrosion. Bonus was it dampens some of the ring-ding pipe noise. It got multiple sprays of black Plasti-dip after I got the bend right, but that probably was more asthetically effective if anything.
 

joe woj

Member
Oct 29, 1999
58
0
i have one of these on my bike its really trick, it went right over my FMF pipe, of course i polished mine, heres also a tip, the way it mounts with screw clamps it kept comming loose so i got some 1/4" stainless bolts and mig welded them to the pipe then drilled the guard to match, a locking washer and nut and im good to go, i dont know how good you can see it in my pic under reader rides but check it out.
 
Top Bottom