I cleaned my bike with a new degreaser
and my new rear brakes are squeeking.
I sanded them down a bit but they still squeek.
If there any way to stop the noise?
Do you know that most brake pads contain asbestos? If the fluid is on the pad, its in the pad also, scrap. De glaze your rotor with a green scotch brite pad, and wash it in hot soapy water, especially the holes, then hit it with non chlorinated brake cleaner. Put new pads in. Vintage Bob
as far as i know asbestos was prohibited in any aplication. at least this is general common sense and hear say(i know, i know). i really don´t know if there is a maximum percent or totally banned.
with or without, pads are garbage...
edit: further investigation led me to wikipedia :)
from wikiknowseverithingpedia i get this:
http://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexapi!prod!CELEXnumdoc&lg=EN&numdoc=31999L0077&model=guichett
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.