I was riding in the sand pits near me and I noticed sort of a pinging noise, more like a rattle after a while. The bike runs hot in the sand cause you are at WFO about 80% of the time but I have never really had a problem before. The bikes jetting is stock and it was about 45 degrees out. When I replace the plugs, they always looked good, so the jetting was pretty good stock. The bike is new and I couldn't find anything loose on it. I went over every bolt with my T-wrenches and nothing was loose so now I'm suspecting it might have been pinging that I heard.
Usually stock bikes come jetted more on the rich side then the lean side but is it possible that with the bike running in the sand and running hot that it started to ping?