License plate bracket

[Sandman 2.0]

Just wondering if anyone has found or made a license plate bracket for the KDX? Massachusettes seems to be in love with ATV plates rather than stickers and I don't really want to bend it around my fender. I've been puting it in my camelback but a few EP's have taken exception to that. Technically, it's supposed to be readable from behind the bike (I've been told). I noticed some threaded holes under the fender. It seem like a bracket could be attached there. wondering what others have done.

 

[Ogre]

I made one.

N/C cut it from 1/8" Aluminum, drilled to match and then formed the 45 deg bend on a press

Bolts to the rear frame.

Here is the part program I made.

 

[Sandman 2.0]

Hey Ogre thanks

That's a really clean KDX you have there. You guys can register a 2 stroke in Florida? You don't happen to have a dimensioned drawing do you? I have solidworks and ACAD. We have a wire EDM so I could cut one out similar to what you did.

 

[Ogre]

Thanks
No you can't register 2 strokes in Florida.
This one got titled and plated thru Alabama then brought back into FL.

PM me your e-mail and I'll send you the autocad file.

 

[Sandman 2.0]

Hey Ogre

I can't PM you but you can send file to [email protected].

thanks again!

 

[Ogre]

Sent it on.
Let me know if it works for you.

 

[rkjaco]

4 strokes only sells one for around $29, it bolts to rear tail light underneath. I bought one and it works really good