Major news!

[Jeremy Wilkey]

Hey All... I'm more than a little pumped right now.. I just got off the Phone.. It's a done Deal.. I'm Going to OZ for a major test, in a new arena! RoadRacing I'll be handing out some details over time.. I'm leaving in 1 mounth and will be gone for two weeks.. I'm scared to death right now as I have so much to prepare for, and get done here at MX-Tech.. I just thought I would share my enthuasim with all of you.. We will be opening Mx-Tech Factory Racing of Australia and Launching my good Freind Steven Mudford while there..(He is the base camp..) Lots more to come...

Jer

 

[Tony Williams]

Jer,

Congratulations on your newest expansion!

Off the topic, my '98 Yz400F forks that you tuned up in June are seemingly *slightly* more harsh than when first received.

I've never had any noticable air escape through the little vents, haven't changed the oil, etc.

Your thoughts?



------------------
Tony Williams
Over The Hill Gang #305B
San Francisco Bay Chapter
YZ400F ('98)
YZ80 ('00)

 

[Michelle]

Wahoo, that's awesome Jer

Any chance of coming to NZ as well? We're just across the ditch. If you even think you might pop in for an hour or so drop me a line & I'll give you our number.

Would love to meet you

Michelle

 

[MXTex]

Congratulations Jer! That is truly excellent news. All the best.

Jim

 

[wrench]

CONGRATS!!!!!!!!!
I'm sure that you will ENJOY the experience, take lot's of pic's..I for one would love to see them (being an old RR)

BTW...will you be bringing a 55gal. drum of M1-ATF????

wrench

 

[Jeff Howe]

You can't buy it by the drum Wrench. If you could I would have one for sure.

 

[Jeremy Wilkey]

I can't tell how much I'm going to love it!

Tony.. The forks are stiffer with the mid-valve change.. Firmer more feed back, but not harsher, I suspect.. That is the minimum change we can make to the mid-valve so it will hold up over time.. The only real answer form here is to re-valve..

Michelle,
I was actually hoping the flight would have a layerover so I could see some of NZ... I would be honnored to me you and your Husband.. I'll see if we can make it happen..

Jim,
Thanks man.. Always a new challange!


Wrench,
Customs are a hassle when I bring tools so I can't imagine how hard that would be with a drum of M1-ATF..

Maybe we could figure out how to get you in that barrel as a stoll away! LOL Then you could show those Factory Road Race boys everything you know about "Plastic Modifications"

Jer

 

[wrench]

Hmmmmm.......Brake actuated rear Wing/Air Brake !! Roller Blades attached to the knees!! Yea ..THAT'S THE TICKET!

I'm considering your offer...maybe I could earn my scuba rating (I'm sure I would need a Scuba Tank for breathing)!!

And when someone complains about the CHICANES...show them your MX prowess and tell them to hit the "curbing" and DOUBLE IT!

SERIOUSLY, Have a great time, try not to work too much and enjoy the sites!


wrench
"DRN JESTER"

[This message has been edited by wrench (edited 10-17-2000).]

 

[Rich Rohrich]

Congrats Jer - If the asphalt XR suspenders you did for me a few years back are any indication, you should take the road race world by storm. Good Luck.



------------------
Rich Rohrich
==

The theoretical broadening which comes from having many humanities subjects on the campus is offset by the general dopiness of the people who study these things...
------ Richard Feynman

 

[Weasel]

Jer-
Congradulations!!!!
Have a safe trip and enjoy the experience, hope everything goes well for you!
Weasel

 

[MX221]

If you need any help, ANY HELP, let me know. You know my number.

Shane

 

[cr250john]

Way to go Jer!!
All the DRN members realize YOUR THE MAN!
Thanks for all your help in the past.
Good luck!

------------------
cr250john
Mine '00 CR-250 '95 Yamaha Virago XV-750
Kids '01 CR-80's

 

[jjj]

Congrats Jer
Sounds like your great reputation and hard work are paying huge dividends everywhere. Enjoy the challenge!


------------------
jjj pizzaguy
01 KTM 520SX
00 YAM YZ426 For Sale
00 KTM 400SXC For Sale

Finished Buying Bikes For A While I Hope!!!!

00 YZ426F