Need cabrurator part

[fusion]

Hey everyone! So my pilot jet is stuck in the carb and i need a new removable venturi. Can i buy one or do i have to get a whole new carb?

 

[mideastrider]

Carb Parts Warehouse may can help you out with that problem.

 

[julien_d]

that part is actually specified as "do not remove". So although it is technically "removable", I do not know if there is a replacement part available. SUDCO might be able to help you out if you call them up.

 

[nearma12]

Is the jet just stripped so you can't get it out with a screwdriver? If so, maybe an easyout bit will work.

 

[fusion]

Is the jet just stripped so you can't get it out with a screwdriver? If so, maybe an easyout bit will work.

I tried a easy out but it didnt work :( the brass is too soft.
Have not found anyone that can get the venturi, i might have to buy a new carb :((.

 

[jonooffler]

Hi there one trick to try is to heat up the venturi a little bit that will make it expand and the pilot might just come out a bit easier.
Wait for the wife to go out and then bung it in the oven for a short time at a low heat ;) .
I have done that with other stuck treads and it's worked every time,
I would make sure that the carb is very clean first.
Jono