Need Jetting Suggestion # 6 Slide
Have an 03 KDX 200 with FMF woods pipe, PC sparky, V-Force reeds, air box lid opened up etc…Need a jetting
starting point for a # 6 slide..I have CEJ through CEM
needles and pilots 38-48, mains 148-165. I currently run a # 5
slide with 40pj..150mj..1174 c-1 w/93 pump gas and ride at 4-
6,000 feet 40-60F temps..The air screw didn't come into play until a 42pj was installed. Thinking CEL3..152MJ..40PJ as a start...Anyone with experience using a # 6 slide? Thanks
Domenic
Have an 03 KDX 200 with FMF woods pipe, PC sparky, V-Force reeds, air box lid opened up etc…Need a jetting
starting point for a # 6 slide..I have CEJ through CEM
needles and pilots 38-48, mains 148-165. I currently run a # 5
slide with 40pj..150mj..1174 c-1 w/93 pump gas and ride at 4-
6,000 feet 40-60F temps..The air screw didn't come into play until a 42pj was installed. Thinking CEL3..152MJ..40PJ as a start...Anyone with experience using a # 6 slide? Thanks
Domenic
Last edited: