I've got the Tag X5 CR Hi bend like a lot of others here. They are about 31 1/4 inches, 797mm, which is a little narrower than most.
I cut them down to 30 inches and now don't have room for my controls. My front brake perch is now forced to mount at the start of the bend, creating an odd pull angle. Guess I should have measured a little more closely.
I don't know of any body who makes a woods specific, i.e., narrow bar for 7/8" mounts. ProTaper makes an oversized enduro bar that is 30.5 inches stock. The best part is it's reduced width came from making the mounting section narrow and not just lopping off the bar ends and giving it a new name.
This gives you plenty of room for your controls, enough to mount them pretty far in for less brake and clutch handle "pull" fatigue.