Wolf
doooode
- Jul 31, 2000
- 2,487
- 1
My 2000 kdx200 has developed a new hickup, and frankly, I'm not sure which direction to go.
Jetting: 45pilot, stock needle - 2nd clip from top, 152 main, AS 1.5 turns. Temp about 55 degrees, Wisconsin.
PC pipe, stock silencer.
The bike pulls well off the bottom, I get to the mid range and it seems to stutter a bit, once I get through that it pulls nicely on top. I have tried different needle positions, no luck.
Stock needle I believe is 1174k (me thinks). I also tried a 1173 needle, but can not for the life of me remember the letters on it.
I could use a little advice on where to go next. Yes, I am aware of the great site from CD, as a matter of fact, here is the link:
http://www.dirtrider.net/forums3/showthread.php?t=70290
My apologies to you in advance, I know this has been covered before.
Jetting: 45pilot, stock needle - 2nd clip from top, 152 main, AS 1.5 turns. Temp about 55 degrees, Wisconsin.
PC pipe, stock silencer.
The bike pulls well off the bottom, I get to the mid range and it seems to stutter a bit, once I get through that it pulls nicely on top. I have tried different needle positions, no luck.
Stock needle I believe is 1174k (me thinks). I also tried a 1173 needle, but can not for the life of me remember the letters on it.
I could use a little advice on where to go next. Yes, I am aware of the great site from CD, as a matter of fact, here is the link:
http://www.dirtrider.net/forums3/showthread.php?t=70290
My apologies to you in advance, I know this has been covered before.
Last edited: