new to me crf

eric311 said:

I just got an 04 crf 450 and it needs a little work and I am new to this and need some advice. I am a little concerend anout the power and I am considering a (flywheel stealthey heavvey flywheel) Is this a good idea or eill it cause problems down the road?

Also I need valves, piston, left crankcase cover(JB weld) and tires. any sugestions on where and what to get

thanks all :coocoo:

Click to expand...

I have an 10 oz flywheel weight for sale.

It mellows the hit a bit. But it's still a pretty powerful bike.

As for the valves, you might want to find a good local bike mechanic/machinist you can trust.

As for the piston and associated parts (rings, wrist pin, gaskets), Service Honda.. There's a link up on the left for them.

The covers on that bike are aluminum, so if you can have it welded, do that. It'll be better in the long run.

Where are you located?? Maybe if we knew that, someone on here might be able to suggest someone to do the valves for you.

04 is a magnesium cover (believe that is the first year of it, if not it is 05)

your best bet is to just pony up and get a new one from honda.

you can use the 04-05 TRX 450 intake valves - steel. Pretty cheap. Be sure to get new springs. The stock exhaust valves are steel. But yeah, if it is over your head, pay someone to do the work.