hi all
big hello :)
can anyone help me out
can anyone tell me the timing settings for the inlet & exhuast on a 04 rmz 250, also are the inlet cam sprockets welded as standard
reason i ask is just bought one it`s an absolute pig to start checked the timing the inlet was 3 teeth out so reset using the timing marks and it pops and farts into life
the sprocket has been welded so my asumption is it has slippe d at some point and been welded back in the wrong possition so need settings to dial the cams in
many thanks
gusset2
big hello :)
can anyone help me out
can anyone tell me the timing settings for the inlet & exhuast on a 04 rmz 250, also are the inlet cam sprockets welded as standard
reason i ask is just bought one it`s an absolute pig to start checked the timing the inlet was 3 teeth out so reset using the timing marks and it pops and farts into life
the sprocket has been welded so my asumption is it has slippe d at some point and been welded back in the wrong possition so need settings to dial the cams in
many thanks
gusset2
