chris kuba
Member
- May 31, 2003
- 83
- 0
At the end of last season I slowly lost the use of the front brake on my '99 KDX 200. There was no visible signs of leakage and the resevoir was still full. I replaced the plunger in the master cylinder and that didn't work. So I replaced the brake line as well. There is still something wrong. I try to fill with new fluid but it still does not pressurize. Does anyone have an idea? Fluid does come out of the bleeder valve but very slowly. It also took about 2hours of squeezing the handle to get it to come out. Caliper is last thought but don't know where to begin.