no spark?

M

Moparman1539

Member

Sep 9, 2006

804

0

• Dec 30, 2008

• #1

Ok, i started my bike, and i was warming it up, and it just stopped, i kicked and kicked forever, I put in a new plug. and nothing...

I checked to see if there was any spark and there was none.

How can i check if my stator or ignition coil or kill switch is bad?

I have a voltage meter somewhere, and a simple electrical tester (pretty much a screwdriver with a wire and a light.)

I don't know much about electrical so any help would be appreciated.

Thanks
~ (V)opar

 

O

OriginalRider

Member

Nov 23, 2008

124

0

• Dec 30, 2008

• #2

Well take of you kill switch then if it starts you have a faulty kill switch.Theirs a diagnostic tools out there for this problem just make sure you know how to use them!

 

whenfoxforks-ruled

Old MX Racer

~SPONSOR~

Oct 19, 2006

8,129

2

Merrillville,Indiana

• Dec 30, 2008

• #3

The manual and a multi tester.

 

J

_JOE_

~SPONSOR~

May 10, 2007

4,697

3

• Dec 31, 2008

• #4

Yeah, start with disconnecting the kill switch. You'll need a service manual for specs on the ignition.

You guys get some snow yet? We got it early this mornin'.

 

whenfoxforks-ruled

Old MX Racer

~SPONSOR~

Oct 19, 2006

8,129

2

Merrillville,Indiana

• Dec 31, 2008

• #5

Snow? Single digit air temps!!!!!