Parts Parts Parts

[3Wheelerdude]

I bought a neglected 91 KDX 200. Bike has bicycle handlebar, just to give you an idea of the abuse!!!

Anyway, I need to know what is the right spark plug for this bike? It currently has a NGK BR9ES in it and is horriblly hard to start even after a full carb clean up.

I also would like to know which brake pads to order for this bike. Dealer asked if it was a E1 E2 or E3? In the stamped code on the goose neck, there is E1 in the combination. Does this mean I should order E1 brake pads?

Thanks guys, I ma really looking foward to bringing this monster back to life.

 

[Chili]

BR9ES is the stock plug for a 91 KDX200. I know nothing about these bikes but the buykawasaki site identifies the 91 KDX200 as E3, I'm sure other KDX owners will be along shortly to confirm or debunk that theory.

 

[kid1293]

The 91 is an E3 my 90 is an E2 and the 89 is the E1

 

[Crashtheline]

And my 86 is a C1...fyi

 

[iamthecowboy]

An engine needs 3 things to start, spark, gas and compression. Does the bike have all 3 of these? Does the bike finally start? Once started does it run, if it runs does it run well? Food for thought.

 

[3Wheelerdude]

Yeah, bike is hard to start but will start with some help. It runs like a champ too. Once warm it start on the first kick. But then it sits over night and is a biatch to start again....

Compression, fuel, spark and air.....its got all 4.

 

[Chili]

I'd be looking at a possible worn top end or worn out reeds.

 

[3Wheelerdude]

Thanks, I'll look into the reeds since it easy enough to check.