Pipe to Muffler gap

R

RIRider

Member

Sep 16, 1999

38

0

• Jan 17, 2003

• #1

I put on a PC pipe and used the stock muffler but I am getting some spooge where they connect. The rubber seal piece is not cutting it. What is the best thing to use to seal this up nice nice.

 

M

Mike McGlade

Member

Jan 13, 2000

57

0

• Jan 17, 2003

• #2

I zip tied the rubber sleeve on my 98 220 (FMF rev pipe/turbine core 2 silencer) and that has been working fine. There are two grooves near the ends of the sleeve that accepted the zip ties and prevents them from slipping.

 

M

Mac

LIFETIME SPONSOR

May 17, 2000

505

0

• Jan 17, 2003

• #3

A little RTV silicon and a few ti-wraps go along way. Many people have this problem.

 

B

BRush

LIFETIME SPONSOR

Jun 5, 2000

1,100

0

• Jan 17, 2003

• #4

A little silicone and some time to cure and you won't even need the rubber piece.

 

T

Tom Ludolff

Member

Oct 3, 2002

250

0

• Jan 17, 2003

• #5

I put a couple hose clamps on mine. Works great!