Hi, im doing the top end on my KDX 220. I have cleaned it all
and I was wondering what is the best method to prepare my cylinder. There is some glazing and streaks but no scratches
or gouges. I heard scotch brite works but I don't see how it
can work the tough nikasil coating since it takes lots of effort even on the aluminum mating surfaces. Any advice would be great, thanks.
and I was wondering what is the best method to prepare my cylinder. There is some glazing and streaks but no scratches
or gouges. I heard scotch brite works but I don't see how it
can work the tough nikasil coating since it takes lots of effort even on the aluminum mating surfaces. Any advice would be great, thanks.