Hello!,
At first i'd like to apologise for my language.
I'm having some problems with proper SAG adjustments in my KTM EXC-R 250 2005.My weight is 60kg/132lb,i have stock fork and shock installed (WP).I was lowering my bike by decreasing shock spring preload and now its to soft i think,it bottoms easily when landing after the jump and the bike geometry is very slack when sitting on the saddle.My question is what should be the proper SAG on front as well as rear to fit my weight best?
dm88,
You should set the rear sag to 110 - 115 mm and have a static sag of close to 35mm if you have the right rear spring rate . The stock .40 fork springs set at around 8 - 10 mm of preload should give you a good set up up front . Fork sag is realy hard to properly check due to all the stiction in the front set up ( just the nature of the fork tubes ) . On the shock you should install a PDS 5 spring and then set the sag to the above mentioned numbers.
I'm truelly satisfied of your reply Pete - Thanks.I'd also like to know if i should change the shock low and high speed compression damping to minimum (-) when adjusting sag or leave factory adjusments?