pw50 fuel mix?

Y

yam-man

Member

Nov 14, 2004

6

0

• Mar 19, 2005

• #1

I was wondering if anybody can give me any (how-to) or (where-to) get information on disconnecting the oil pump on a yamaha pw50? I would just rather use premix so I don't have to worry about the oil pump going bad and messing up the motor. And what ratio would you mix it? Thanks :bang:

 

Y

yam-man

Member

Nov 14, 2004

6

0

• Mar 19, 2005

• Thread starter
• #2

Anybody??????

 

Y

yam-man

Member

Nov 14, 2004

6

0

• Mar 19, 2005

• Thread starter
• #3

PLEASE...Somebody help

 

N

ncflattrack

Member

Feb 18, 2005

11

0

• Mar 19, 2005

• #4

Pw 50

As far as I know, most of were just capped off at the inlet and the outlet of the pump. Also capping it at the carb also. Physically taking them off would require a block off plate, which I have not seen from any one. As for a ratio I would think 32:1 or 40:1 especially on a air-cooled engine. :nod:

 

Y

yam-man

Member

Nov 14, 2004

6

0

• Mar 19, 2005

• Thread starter
• #5

Thanks for the information! :ride:

 

Jasle

Sponsoring Member

Nov 27, 2001

1,358

0

• Mar 27, 2005

• #6

the best way to do it is remove the pump, then remove the drive gear. then reinstall the pump. this way the pump is not draggin on the motor anymore. then remove the tube from teh side of the carb and cap it off.