PWK carb for 2002 CR250

[rcpilot_971]

Dose any one know where I can get a PWK carb for my 2002 CR250 I checked a service honda and they said I would need a part # Im not really sure witch one I need for my bike I think I read some where on hear you can get them and they come already jetted


Thanks Tim

 

[Mike_socal]

It's the carb for a 2000 cr250. Looking at the service honda site I'm pretty sure the part # is 16100-KZ3-J21 Carburetor Assy.

 

[elf]

Heres the part number........16100-KZ3-J21
If they want to know its the stock carb from a 2000 cr 250

I guess it would be jetted for the 2000, you might have to fine tune it a little.

 

[mx547]

i just put one on my '02 today.

 

[skipn8r]

I just got one from Carb Parts Warehouse for my '03. The price at $239 seems more expensive than $160 from Service Honda, but you get a spare needle and jets worth around $50. It came jetted close for my altitude and I've been able to get it dialed just about perfectly with the spares they sent. Plus, I got it in just a couple of days. If you do decide to go with Service Honda, you need to talk with AJ. He's their PWK/CR250 guy.

 

[rcpilot_971]

i just put one on my '02 today.

where did you get it and was it jetted for you have you got to try it out yet

Tim

 

[rcpilot_971]

I found it at service honda it says carburetor assy dose this meen its the whole carb and slide with jets ready to bolt right in


Thanks Tim

 

[mx547]

where did you get it and was it jetted for you have you got to try it out yet

Tim

i got it at a local dealer, honda of tulsa. it was stock jetting. when i had a 2000 cr 250, i went one leaner on the main jet and left it that way. i don't know yet how this one will be. i rode it down the street but i have other problems to deal with before making a judgment.

 

[mx547]

I found it at service honda it says carburetor assy dose this meen its the whole carb and slide with jets ready to bolt right in


Thanks Tim

yes.