I got a bit confused this past Saturday :bang: trying to figure out what the best rebound and compression settings for my 2003 KDX 200 would be. I’m 130 with out gear and use the bike mainly for tooling around at the track and plan on racing in a few harescrambles this summer. Any suggestions you might have would be greatly appreciated. :cool:
If you've got your rider and static sag set correctly.. http://www.transworldmotocross.com/...,831293,00.html
then the compression/rebound damping will be good at a coupla clicks below standard for around the shed and back.
If ya start hitting kickers bump up the compression and do some research into measuring your jump and take off gear.
:ride: