I just put my rebuilt motor (lower/top) in my bike and hooked everything up and added the fluids, etc. and the bike won't start. I did my normal routine of turning on the gas, lean the bike over, pull the choke and kick. I couldn't get it to turn over. When I first tried to kick it I noticed gas pouring out of the over flow tube so I adjusted the float and solved that problem. Now i'm dealing with this. Anybody have any tricks they could let me know about so I can try to get this b*tch going again. I'm going to call the mechanic who built in tomorrow but i've always gotten great advice from people on this site. Thx.