Reed Valve question??

C

Coolector

Member

Nov 25, 2003

106

0

• Feb 14, 2004

• #1

I took out the reed valve yesterday and noticed 2 out of 3 were not sealed at alll. I don't know a whole lot about them but the manual says to turn the reeds around, this makes sense. I have been having a few problems withj the bike idle wise(high) How much do the valves change things if they are not sealed(duck billed)
Thanks

 

B

BlazinBoy

Member

Feb 13, 2004

35

0

• Feb 14, 2004

• #2

It will affect the bike idle and performance immensely. I suggest buying a new set. You will notice a difference. Replace them with Boyesens if you can.

 

B

BlazinBoy

Member

Feb 13, 2004

35

0

• Feb 14, 2004

• #3

I would only turn them around as a quick fix. Reeds tend to get brittle and will crack and chip.

 

RM_guy

Moderator

Damn Yankees

LIFETIME SPONSOR

Nov 21, 2000

7,045

208

North East USA

• Feb 14, 2004

• #4

Put new reeds in and you'll notcie you have more low end and it will start much easier.

 

C

Coolector

Member

Nov 25, 2003

106

0

• Feb 14, 2004

• Thread starter
• #5

Thanks again guys I will be doing that soon.