89dragger

Member
Mar 27, 2007
19
0
hello, i have a stock 39 tooth rear and a 12 tooth front sprocket on the stock bike now. it is a bit sluggish on acceleration than i would like but not too bad. if i add a 51 tooth rear sprocket, would that be too much accelleration. i want the bike to run somewhere around 55 if possible and have enough power to pull good through deep mud or ride a wheelie and climb hills. i also have a 14 tooth front that i could put on it to tame the 51 tooth rear if needed. any advice on this subject would be great. thanks.
 
Top Bottom