Squidly Gopher Dunes Photos
- Thread starter Squid31
- Start date
- Thread starter
- #4
Thanks Doug. I would love to come out, but I just can't come up with the funds. All this house fixing has put a serious dent in the old savings account so things are kind of tight this year. If the invitation still stands for next year, I might just take you up on it.
Your usual stellar work. :cool:
I have to say the B&W stuff is by far my favorite. I mean no disrespect to your color work, but I think your B&W stuff really stands out.
I have to say the B&W stuff is by far my favorite. I mean no disrespect to your color work, but I think your B&W stuff really stands out.
- Thread starter
- #7
Thanks Rich. No disrespect taken.
Thanks Doug. The invitation goes your way as well. If you ever wanted to check out Gopher or Walton they are both within 3 hours of home.
The basement was never a problem, dry as a bone. The crawl space under the main floor (3 level side split) was the part that was damp. Turns out there were never any drainage tiles put in along the footing on that side of the house, so the water just leached in. It's sealed up so good now we would need to have a major flood to have any water in there.
Thanks Doug. The invitation goes your way as well. If you ever wanted to check out Gopher or Walton they are both within 3 hours of home.
The basement was never a problem, dry as a bone. The crawl space under the main floor (3 level side split) was the part that was damp. Turns out there were never any drainage tiles put in along the footing on that side of the house, so the water just leached in. It's sealed up so good now we would need to have a major flood to have any water in there.
- Thread starter
- #9
Thanks man.
Yep, I use an action that I made that runs 2 actions from I set I downloaded. It's called something like "AC Simple Frames". I set the color to white and run the thin action, then I set the color to black then run the bevel action. Simple as that.
Yep, I use an action that I made that runs 2 actions from I set I downloaded. It's called something like "AC Simple Frames". I set the color to white and run the thin action, then I set the color to black then run the bevel action. Simple as that.
