stalling

[KDXFORU]

92' KDX 200.
Recently bought this bike. Everything about the bike is GREAT! with one exception, it stalls when you come to a complete stop. When you first crank it up it starts first kick almost every time and if not first within 3. Then as I have the bike warming up it sounds as if is about to stall but doesnt. After it is warmed up whenever I come to a stop it stalls unless im on the throtle reving it. Could this be due to low idle speed set on the carb? If I was to adjust the idle which way would I turn the screw? Seems like it would only be this minor adjustment but didnt want to start messing about until I got some advice.

Thanks in advance
Steve

 

[bradf]

Idle screw is plastic so adjusting it in CW (increase) with the slide closed (throttle off) can damage it. So to be safe, with the warm engine off, twist throttle open, screw idle adjust 1/4 turn CW. Then start the bike. If it idles too fast, back it out slowly.