cweingartz
Member
- Jun 6, 2000
- 241
- 0
Has anyone tried this themselves? I want more lighting output and I was wondering if any of you have had success with this.
Stator Rewinding
- Thread starter cweingartz
- Start date
ZKDX
~SPONSOR~
- Aug 23, 2002
- 309
- 0
i tried, no luck. I'm probably no help then, but i have heard many on here that have. I think I was mis-guided when i did mine (probably by myself)!! You might try this link.
(http://www.suzukicavalcade.com/Maintenance/stator.htm)
It is for rewinding a stator on a street bike, but same principal
good luck let me know how you do
(http://www.suzukicavalcade.com/Maintenance/stator.htm)
It is for rewinding a stator on a street bike, but same principal
good luck let me know how you do
dirt bike dave
Sponsoring Member
- May 3, 2000
- 5,348
- 3
cweingartz
Member
- Jun 6, 2000
- 241
- 0
- Thread starter
- #4
I have found information similar to that but the stator on my kdx is different.
Look here.
http://www.buykawasaki.com/scripts/EmpartISAPI.dll?MF&app=KMC&cat=KMC&session=a9tkRJ29cYCzH1J7UDv*z/**&mode=7&ImgMap=Yes&assem=84388&speccode=US&title=KDX200-E4
Look here.
http://www.buykawasaki.com/scripts/EmpartISAPI.dll?MF&app=KMC&cat=KMC&session=a9tkRJ29cYCzH1J7UDv*z/**&mode=7&ImgMap=Yes&assem=84388&speccode=US&title=KDX200-E4
grass-digger
Member
- Oct 21, 2001
- 184
- 0
hey guys i have a little question if i were to rewind a old spare broken cr250 stator what would happen if i just wind it on the bare polls, is it suppose to be wound this way or is there some other thing suppose to be put on the poll before i get into winding it, and should i just just wind the first poll out of the six starts from the bottom and finish at the bottom and continue the same pattern for all 6 poles? thanks
