ScottZX7RR
Member
- Sep 11, 1999
- 73
- 0
My 2000 YZ-426F was stolen Friday Night from 8:30pm to 7am. Mainly the steering changes and oversized tank. But I also included a pic of the bike.
Modifications and identifying markings.
Scott's Steering Damper Set-up
- Silver Pro-Tapers
- Scott's Billet Tripleclamps
- Scott's Steering Damper
- Scott's Bolt-On Steering Head Bracket
Acerbis Rally II Hand Guards (Blue)
IMS Clear Oversized 3.5Gal Fuel Tank
Gripper Seat cover (Blue)
Renthal O-ring Chain and Sprocket Set-up
White Bros. E-Series Race Pipe and Header Setup
TrailTech Computer Setup w/Caliper Bolt Magnet
Fastline CR Routing Steelbraided Brakeline (Blue)
Custom Printed Graphics (#19) Kit, currently has handwritten "414" on contact paper (4"X4") on the top
Tri-City Cycles Fender Graphics
Total Control Suspension Re-Valve and Fork Graphics
Dunlop 756 Tires
Also stolen was a custom made loading ramp. It was made from a car hauler ramp. It is U-shaped made from aluminum and perforated holes for traction w/ a bracket welded on to end for the truck bed. A very stout built ramp. A Blue Kerosene 5-Gal Plastic Gas Can. Heavy-duty tie-down straps. With a single loop strap for the handlebars.
I will get the VIN for the bike shortly. I had some paperwork in a spare parts tote with it that got stolen so my original paperwork is down at the farm. I appreciate any help that anyone can provide.
Modifications and identifying markings.
Scott's Steering Damper Set-up
- Silver Pro-Tapers
- Scott's Billet Tripleclamps
- Scott's Steering Damper
- Scott's Bolt-On Steering Head Bracket
Acerbis Rally II Hand Guards (Blue)
IMS Clear Oversized 3.5Gal Fuel Tank
Gripper Seat cover (Blue)
Renthal O-ring Chain and Sprocket Set-up
White Bros. E-Series Race Pipe and Header Setup
TrailTech Computer Setup w/Caliper Bolt Magnet
Fastline CR Routing Steelbraided Brakeline (Blue)
Custom Printed Graphics (#19) Kit, currently has handwritten "414" on contact paper (4"X4") on the top
Tri-City Cycles Fender Graphics
Total Control Suspension Re-Valve and Fork Graphics
Dunlop 756 Tires
Also stolen was a custom made loading ramp. It was made from a car hauler ramp. It is U-shaped made from aluminum and perforated holes for traction w/ a bracket welded on to end for the truck bed. A very stout built ramp. A Blue Kerosene 5-Gal Plastic Gas Can. Heavy-duty tie-down straps. With a single loop strap for the handlebars.
I will get the VIN for the bike shortly. I had some paperwork in a spare parts tote with it that got stolen so my original paperwork is down at the farm. I appreciate any help that anyone can provide.