musicman52485

Member
Feb 19, 2004
6
0
Hey guys, I'm new here. I just aquired an 89' suzuki Rm 80. I can't get this thing started! The spark plug is sparking and then engine turns over fine. It seems to turn over easy, so i'm wondering if it's a compression problem. I just replaced the piston ring. Could it be the reeds or the carb? anything would help me. thanks in advance!
-matt
 

sampson

Member
Nov 5, 2002
35
0
you replaced just the rings? the piston might be worn.you could check the compression to see if it has enough that would be a good place to start.it could be a number of thing though.
 

Red Rider 53

~SPONSOR~
Jan 16, 2003
282
0
Might want to check the fuel air mixture before you go too crazy about taking things apart. Sometimes it is even something as simple as the idle being too high. I would check all the simple possible problems. With any luck that is what it will be.
 

musicman52485

Member
Feb 19, 2004
6
0
Well I cleaned up the carb and change plugs and you could tell it wanted to start up. But for the hell of it, i took off the cylinder and bam! there's the problem. There's practically no compression. I think i'll need a new piston and definetly a new ring. I'm so tempted to just get a new bike and if the repair bill goes over 300, i'll just get something newer.
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom