as long as everything moved good adn your greased everyhting good you should be good till the end of the year at which time i woudl advise you to take the time and put new bearings in as they can greatly affect handling.I would know as mine were all toasted and didn't even come close to rolling. I, however, was fortunate enough to own a machine press, i would recomend that you take it to a shop and have them press them in rather than trying the "vise" method(which is ok, but may damage the new bearings if your not careful)and after that just take it apart yeary and grease it, and you should be trouble free.