Top End Gaskets

[DirtBiker125CR1313]

I recently ordred a top end gaket set to do a top end rebuild on my 125. The set came with a lot of extra gaskets and three big o rings that I don't where they go. I know what three of them are(head, base, and exhaust port) but the rest I am clueless.

Here is the link to the picture.
http://i792.photobucket.com/albums/yy205/DirtRider1341/Gaskets.jpg

 

[FruDaddy]

Reed valve, probably power valve shaft o rings. One of them looks like a water pump cover gasket. Some of them may be for parts that you don't actually have to remove. I can replace the piston on a KTM 85 and only need 1 gasket, or I can pull it down and use a lot more than there are in your kit. It contains everything that you will need if you completely disassemble the cylinder. Pay attention as you take it apart.

 

[Patman]

Are those "big O rings" actually a couple of pump seals?