KAY DEE EXER
~SPONSOR~
- Mar 3, 2003
- 629
- 0
I cant find one in Australia. :bang: I found some posts about making a home made adapter with a 12mm spanner and a 3/8 socket. Here comes another 'Dodgy' pic in the hope it makes my question easier to understand. Now note the length from 'A' - 'B'. Would it matter if the one I make is as long as 'C' - 'D'? I know all about the 90 degree angle part but does the shaft length change the torque readings. Thanks all. :thumb: