tusk clutches?

[+30]

Anyone use them for mx? The price is very attractive. I have been using barnett and ebc...

 

[Masterphil]

Some people have had great results with them, others hate them. For the price, you can't really pass it up. I'm going to use one when I have to change out the clutch on the 125.

 

[robwbright]

Don't know about the clutches (yet) but my Tusk rear rotor and pads seem to be doing a fine job. . .

 

[gwcrim]

I have a Tusk clutch and Hinson basket in my KX520. I don't race but it's holding up quite well.

 

[moto2121]

I have used them in my 04 cr250 with no problems, I also put one in my friends 02 rm 250 with no problems.

 

[+30]

thanks, Im ordering one to keep as spare, for the price cant pass it up...will post after putting some abuse on it.

 

[Masterphil]

thanks, Im ordering one to keep as spare, for the price cant pass it up...will post after putting some abuse on it.

That's my plan, my stock clutch, still with the Al plates, just won't die! And I abuse the hell out of it!

 

[bclapham]

i tried the tusk clutch. first moto it would swell up then cool with 1/2 a lap......it would go from full on with no lever pulled, to not working at all with the lever pulled...within just a few corners. it was scary.

next moto it swelled up on the gate, the bike rolled forward into the gate and stalled right there.

on monday i sent it back...complete waste of time and a days racing.

 

[kimbrough24]

I put a set on my old 01 CR250 with one of Eric Gorr's bad boy big bore kits and it held up fine. Never noticed any difference in it and the OEM