T Tom L Member Dec 18, 2004 143 0 May 26, 2006 #1 Anyone try to install the v-force III reed cage with a Moose reed spacer? My carburetor is up against the frame crossbar, so I can't get the carburetor to sit up straight for the tab on the carb to meet the notch in the rubber boot.
Anyone try to install the v-force III reed cage with a Moose reed spacer? My carburetor is up against the frame crossbar, so I can't get the carburetor to sit up straight for the tab on the carb to meet the notch in the rubber boot.
G Green Hornet Member Apr 2, 2005 837 0 May 26, 2006 #2 Take the Moose Spacer Off. Look at the V-Force. See how thick the block is that connects to the manifold. Thats your New Spacer
Take the Moose Spacer Off. Look at the V-Force. See how thick the block is that connects to the manifold. Thats your New Spacer
dales298 Mostly Useless ~SPONSOR~ Nov 25, 2003 310 0 May 26, 2006 #3 I don't think so. It took quite a bit of work and a little trimming to clear the frame on my K5. Dale
I don't think so. It took quite a bit of work and a little trimming to clear the frame on my K5. Dale