k5383

Member
Nov 25, 2009
5
0
Me and my sister were riding the PW80 yesterday.


Everything was fine, i finished riding so I left it idleing so she could get on. As she went to put it into gear it made a weird tick and shut off.

It would not start back up.

Cranks over fine, before I could run with it in neutral pop it into gear and it would crank up. Now if I do that the back tire just drags like something is froze up.

Weird thing is that it is fine when it's not in gear, and if it is in gear if you push the bike backwards it will allow the rear tire to rotate??

Is it possible that I killed something in the top-end?

BTW, I was running a 32% mixture. 2 gallons of gas mixedwith one bottle of 8oz two stroke oil.

I also *think that the oil pump system may have come un-hooked. I had an extra vacum line coming off the carb that I noticed yesterday. When i said this to one of my co-workers he said that if I indeed had been running without the oil system it would have been ok??
 

sleeven

Member
Dec 26, 2009
4
0
time for a top end rebuild and if u want to prevent it from happening again get some one to give you a hand and remove the oil injection(google it) and pre mix for now on
 
Top Bottom