Moparman1539
Member
- Sep 9, 2006
- 804
- 0
whenfoxforks-ruled said:You didn't mention that you had the clutch cover off.
Moparman1539 To adjust it do i just tighen the screw?[/QUOTE said:First, loosen the adjuster knob on the clutch lever until there is about 3/8" freeplay in the lever.
If there is an adjuster screw on your engine case, loosen it or back it off a little. Refer to your manual for this. If you don't have a manual it would be in your best interest to buy one.
If the cable is too tight and the adjuster screw is too tight it will keep the clutch plates from engaging.
Moparman1539 said:its just that i do know what im talking about most of the time. (im 15) QUOTE]
:laugh: Sorry Moparman, I'm not bustin your chops either. I just found that to be a little humorous. :rotfl: As you get older, you will find that your parents will get smarter. :nod:
As far as the manual goes, look at one of the online auction sites for a used one.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?