A couple of things about the various bends. The different brands have a different idea of what actual is a CR high bend. To confuse us a little further, some give their specs in inch measurements, and others give mm. To convert, multiply the inch by 25.4 to get mm.
Basically, here's what I liked- anything past 60 mm sweep is too much pullback. 90 mm rise was about right on a KDX for me at around 6-0". (Stock bars are about 75mm rise, and 62 pullback.)
Hope this helps
------------------
-01 RM250 (mine) & 01 RM125 (kid's)
-Senior A Enduro and Hare Scramble Rider.
"Yep, that 14 yr old A Class rider is MY kid; He learned to ride from ME!!"