- Thread starter
- #26
I received the EE handguards/deflectors. I am less than impressed with the way they fit my handle bars. It looks like I will have to grind 1/8" to 3/16" off the ends for the bar to be able to attach to the inner mount. I don't understand why they don't predrill for their own hand deflectors.
Did the rest of you have to grind your bars for them to fit?
Am I over looking something? It appears the inner mount will go right underneath the cross bar. If I go over the cross bar then it pushed the outend out too far.
I emailed EE and they haven't replied.
What is the easiest way to remove the stock grips which look like they were glued in place at the factory?
Thanks
Did the rest of you have to grind your bars for them to fit?
Am I over looking something? It appears the inner mount will go right underneath the cross bar. If I go over the cross bar then it pushed the outend out too far.
I emailed EE and they haven't replied.
What is the easiest way to remove the stock grips which look like they were glued in place at the factory?
Thanks